Tool Mirror with alignment andMove with hook in

In the quarter, usually, stretching and compression is applied. Often, curves already exist, defining the boundary of the quarter. In this area, the design elements of the outer last are to be transferred to the inner last.

The tool Mirror with alignment mirrors lines along a mirror axis. Additionally, the lines are transformed via a combined rotate and move operation in order to position them appropriately. The base point positions are transferred in mm or % into the mirrored position. The lines are now mounted onto these points with different construction options. The construction options can be selected via an option switch.

The tool Move with hook in transforms accordingly for closed method.

Options for Move with hook in and Mirror with alignment

The following step-by-step guide applies to both interactive tools Mirror with alignment and Transformieren with hook in:

Call the interactive transformation tools

• Call up the tool via the Workspace menu construction

  

• Click on mirror line, only applies to Mirror simple , Mirror with alignment and Mirror with alignment

  

• Click one or more lines to be transformed

  

• right-click or click on End

• click one or more points to be transformed

  

• right-click or click on End

• Activate the transformation tool by double-clicking or via <F12>

• adjust the option Adjust Object transformation

• adjust the transformation

Options for ther interaktive tools Transformation

			With setting 1, no move/rotate/compression is carried out. Only mirroring in the tool Mirror simple and Mirror with alignment remains active. In variant 2, all objects are transformed as a group. In setting 3 all objects individual, each object has the corresponding number of drag points for adjusting the transformation.
No adjustment	Adjust all objects together	Adjust each object seperately

Options for Mirror with alignment and Move with hook in

Position absolute / relative

The design element has already been transferred to the inner last. With this option you define where the element is bound onto the boundary lines of the inner last.

Category	Options
		Position on curve: in mm
		Position on curve: in %
		Position on auxiliary line: in mm
		Position on auxiliary line: in %
		Position on curve: in mm with alignment

Option Construction method for hooking in

The design element has already been transferred to the inner last and the target position has been determined. With this option you decide how the element is shaped. There are four adjustment options:

Category	Options		Notes
	Curve with hook in		in the sense of curve manipulation in the curve menu.
	Curve with scale
	Curve with cutting
			New construction with freehand points or direction curve, optionally starting at the original curve.
	Curve new
			For this option you can additionally select:
	Select digi-curve	Select direction-curveSelect direction-curve
	Relative curve adjustment	Free curve adjustment